WHAT IS ARMOR COAT?

A Revolutionary RV Clear Coat Protection

ArmorCoat Paint Protection Coating is a spray installed RV clear coat bra system designed to protect painted surface’s. Ensuring protection in high wear areas of RVs most prone to chipping and damage.

The factory paint finish on most new RVs is a durable finish. Comprised of multiple layers: primer, colored base coats, and a hard baked on clear glossy topcoat. Much trial and testing have gone into ensuring your RV maintains its original color and appearance. But often, applied at a thin layer of only 4 to 5 mils thickness (4 to 5/1000 of an inch), these finishes are subject to chipping after short term use. These factory installed surfaces become susceptible to severe impact caused by large stones or loose gravel. Plus upon high speed impact, those surfaces covered by a hard thin clear coat have a tendency to shatter. The damage often leaves a crater exposing the primer or bare surface of the hood, bumper or body panel.

ArmorCoat Spray Installation

ArmorCoat is spray installed at a dry film thickness 3 to 4 times greater than traditional RV clear coats. Areas not to be covered are masked off prior to installation. ArmorCoat is applied and allowed to air dry

What’s so revolutionary about ArmorCoat?

Never before has a product like ArmorCoat been available as an aftermarket option for RVs. ArmorCoat is designed as a permanent solution to the age old problem of RV paint chipping. When sprayed and cured over an existing OEM or body shop clear finish, the highly flexible and impenetrable properties of ArmorCoat will reduce and prevent chipping, scratching and damage caused by stones, insects and weathering. Best of all, it’s virtually invisible.